Spiral Pulley Negative Stiffness Mechanism for Passive Energy Balancing
BKS Woods & MI Friswell (Swansea University)
Journal of Intelligent Material Systems and Structures, Vol. 27, No. 12, July 2016, pp. 1673-1686
This paper discusses the development, analysis and testing of a mechanism designed to passively balance the energy requirements of mechanical systems in order to reduce the size and weight of their actuation systems and to reduce the associated energy consumption. This passive energy balance is achieved by coupling a negative stiffness mechanism to the positive stiffness of the mechanical system being driven, thereby creating a net zero stiffness system which can be actuated with minimal energy requirements. The negative stiffness mechanism proposed here uses a cable spooling around a spiral shaped pulley to convert decreasing forces in a pre-stretched linear extension spring into increasing torque output, thereby creating a torsional spring with negative stiffness. An analytical model of the system was developed, and the geometry of the spiral pulley was optimized for a representative design case. An experimental demonstrator was then built and tested to confirm the ability of the concept to drastically reduce torque and energy required to actuate a representative load.
This material has been published in the Journal of Intelligent Material Systems and Structures, Vol. 27, No. 12, July 2016, pp. 1673-1686, the only definitive repository of the content that has been certified and accepted after peer review. Copyright and all rights therein are retained by the Sage.
Link to paper using doi: 10.1177/1045389X15600904
Journal of Intelligent Material Systems and Structures