Papers Presented

A Kumar, SF Ali, MI Friswell & A Arockiarajan, Creation and Stabilization of Limit Cycles in Chaotic Attractors through Closure of Orbits. 5th International Conference on Complex Dynamical Systems and Applications, 4-6 December 2017, IIT Guwahati, India.

H Madinei, H Haddad Khodaparast, S Adhikari & MI Friswell, Tuning the Resonance Frequency of a Piezoelectric Vibration Based Energy Harvester Using an Electromagnetic Force. COMPDYN 2017, Rhodes Island, Greece, 15-17 June 2017.

M Tajik, H Haddad Khodaparast, H Ahmadian & MI Friswell, Stochastic Nonlinear Model Updating: Method and Application. 22nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering, UNCECOMP 2017, 15-17 June 2017.

E García-Macías, R Castro-Triguero, S Adhikari, MI Friswell & A Sáez-Pérez, Two Metamodeling Techniques for Optimization of Carbon Nanotube Reinforced Composite Shells. 2nd International Conference on Mechanics of Composites (MECHCOMP 2016), Porto, Portugal, 11-14 July 2016.

AD Shaw, T Hill, SA Neild & MI Friswell, Towards Experimental Reproduction of Backbone Curves of Continuous Structures using Single Point Forced Excitation. ECCOMAS Congress 2016, Crete, Greece, 5-10 June 2016.

AD Shaw, I Dayyani & MI Friswell, Optimisation of Morphing Skins for Buckling Loads. Mechanics of Composites (MECHCOMP 2014), Stony Brook University, Long Island, USA, 8-12 June 2014.

BKS Woods & MI Friswell, Negative Stiffness Spring System for Morphing Aircraft Actuation Energy Balancing, Symposium on the Design, Modelling and Experiments of Advanced Structures and Systems, DeMEASS, 25-28 May 2014, Ede, Netherlands.

CS Beaverstock, BKS Woods, JHS Fincham, MI Friswell, R de Breuker & NPM Werter, Comparison Span-wise and Camber Morphing for Performance and Efficiency, Symposium on the Design, Modelling and Experiments of Advanced Structures and Systems, DeMEASS, 25-28 May 2014, Ede, Netherlands.

NPM Werter, R de Breuker, MI Friswell & CS Beaverstock, A Generic Aeroelastic Morphing Wing Analysis Framework, Symposium on the Design, Modelling and Experiments of Advanced Structures and Systems, DeMEASS, 25-28 May 2014, Ede, Netherlands.

MI Friswell, Morphing Aircraft and Multi-Scale Modelling, IMechE Seminar on Smart Technologies: Clever Thinking for Structures and Materials, 16 September 2010, Bristol.

MI Friswell, Active Winglets, Bi-stable Structures, and Compliant Mechanisms. ESF Advanced Course on Morphing Aircraft: Materials, Mechanisms and Systems, 17-20 November 2008, IST, Lisbon, Portugal.

MI Friswell, Morphing Aircraft Systems. Aerospace 2030 - The Role of Smart Materials and Technologies, 27 November 2007, Oxford.

MI Friswell, Condition Monitoring of Structures and Machines. Applied Nonlinear Mathematics: Making it Real, 10-14 September 2007, Bristol.

DJ Rodrigues, AR Champneys, RE Wilson & MI Friswell, Automatic Two-Plane Balancing for Rigid Rotors. SIAM Conference on Applications of Dynamical Systems (DS07), 28 May - 1 June 2007, Snowbird, Utah.

JE Herencia, PM Weaver, CG Diaconu & MI Friswell, Optimisation Technique for Long and Thin Anisotropic Laminated Fibre Composite Plates. Second Conference on Simulation and Multidisciplinary Design Optimization, Belfort, France, 23-24 May 2006.

MI Friswell, An Overview of Issues in Inverse Methods with Emphasis on Ill-conditioning and Regularisation. Bridging the Gap between Theory and Experiment: a One-day Seminar on Hybrid and Inverse Methods in Experimental Mechanics, organised by the Stress and Vibration Group of the Institute of Physics, Brunel University, 2 May 2007.

MI Friswell & DJ Inman, Morphing Aircraft. South West branch meeting of the Institute of Physics, Bristol, 4 April 2006.

AR Champneys, K Green, MI Friswell & NAJ Lieven, Bifurcation and Sensitivity Analysis of an Automatic Balance Mechanism for Eccentric Rotors. Recent Advances in Nonlinear Mechanics, Aberdeen, UK, 30 August-1 September 2005.

MI Friswell & JE Mottershead, Model Updating in Structural Dynamics: Parameterization and Regularization. Bridging the Gap between Theory and Experiment: a One-day Seminar on Hybrid and Inverse Methods in Experimental Mechanics, organised by the Stress and Vibration Group of the Institute of Physics, Rolls-Royce, Derby, 27 April 2005.

MI Friswell, Defective Systems and Uncertainty Quantification. Workshop on Pseudospectra and Structural Dynamics, Bristol, 13-15 December 2004.

MI Friswell, Quantification of Uncertainty Using Inverse Methods. Uncertainty in Structural Dynamics, ISVR, Southampton, 17 July 2003.

MI Friswell & JE Mottershead, Improved Modelling and Physical Understanding of Structures using Measured Data and Model Updating. EIS Seminar on The Integration of CAE and Measurements for NVH Refinement, Coventry, 1 November 2001.

U Prells & MI Friswell, On Sensitivities of Repeated and Non-repeated Eigenvalues. EuroMech 401, Inverse Methods in Structural Dynamics, Liverpool, September 1999.

SD Garvey, MI Friswell & Y Vershinin, The Geometric Algebra, Cl2, in Identifying Second Order Systems. EuroMech 401, Inverse Methods in Structural Dynamics, Liverpool, September 1999.

C Mares, JE Mottershead, MI Friswell & S James, Selection and Updating of Parameters for an Aluminium Space-Frame Model. EuroMech 401, Inverse Methods in Structural Dynamics, Liverpool, September 1999.

H Ahmadian, JE Mottershead & MI Friswell, Boundary Condition Identification by Solving Characteristic Equations. EuroMech 401, Inverse Methods in Structural Dynamics, Liverpool, September 1999.

SD Garvey, JET Penny & MI Friswell, Structural Modelling of Large Machine Stators at Acoustic Frequencies. International Seminar on Vibrations and Acoustic Noise of Electric Machinery, Bethune, France, May 1998.

MI Friswell, Vibration Control of Smart Structures (invited). Institute of Physics Congress, Smart Materials and Structures, Brighton, UK, 19 March 1998.

JE Mottershead, MI Friswell, MG Smart & GHT Ng, Finite Element Model Updating of Joints and Boundary Conditions. International Congress on Industrial and Applied Mathematics, Hamburg, Germany, Session M175: Inverse Problems in Structural Dynamics, 3-7 July 1995.

JE Mottershead, MI Friswell and YH Zhang, On the Application of Model Updating by the Sensitivity Method: Finite Element Discretisation Effects. International Congress on Industrial and Applied Mathematics, Hamburg, Germany, Session M175: Inverse Problems in Structural Dynamics, 3-7 July 1995.

GHT Ng, JE Mottershead & MI Friswell, Model Reduction and its Effect on Sensitivity Computations in Updating. Workshop on Identification and Diagnosis of Mechanical Structures, Besancon, France, 17-19 November 1993.

SD Garvey, JET Penny, E Krzak & MI Friswell, Computing Critical Speeds. Seminar on the Dynamic Analysis of Rotating Machines, The Institute of Physics (Stress Analysis Group), 1 July 1993.

MI Friswell, Finite Element Model Updating in Design Optimisation (invited). Seminar on the Effective Validation of Numerical Results for Stress and Vibration Analysis, The Institute of Physics (Stress Analysis Group), 23 October 1991.