Published Conference Papers - 2007

C Zhou, MI Friswell & J Li, Condition Monitoring of Cracked Shaft using Active Magnetic Bearings. International Conference on Power Engineering, Hangzhou, China, 23-27 October 2007, 494-504. DOI: 10.1007/978-3-540-76694-0_91.

NM Ursache, T Melin, AT Isikveren & MI Friswell, Morphing Winglets for Aircraft Multi-phase Improvement. 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO), Belfast, 18-20 September 2007, paper AIAA-2007-7813.

T Melin, AT Isikveren & MI Friswell, Cost Appreciation of Morphing UAV Projects at a Conceptual Design Stage. 1st International CEAS European Air and Space Conference, Berlin, Germany, 10-13 September 2007.

NA Ameri, MH Lowenberg & MI Friswell, Modelling the Dynamic Response of a Morphing Wing with Active Winglets. AIAA Atmospheric Flight Mechanics Conference, Hilton Head, South Carolina, USA, 20-23 August 2007, paper AIAA-2007-6500.

JE Herencia, PM Weaver & MI Friswell, Optimisation of Anisotropic Plates that Vary in Thicknesses and Properties. 16th International Conference on Composite Materials, Kyoto, Japan, 8-13 July 2007.

P Bourdin, A Gatto & MI Friswell, Potential of Articulated Split Wingtips for Morphing-Based Control of a Flying Wing. 25th AIAA Applied Aerodynamics Conference, Miami, Florida, 25-28 June 2007, paper AIAA-2007-4443.

S Adhikari, MI Friswell & KP Lonkar, Uncertainty in Structural Dynamics: Experimental Case Studies on Beams and Plates. Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2007, Crete, Greece, 13-15 June 2007, paper number 1308.

MI Friswell, ZP Qiu and F Zhang, The Determination of Convex Sets of Uncertainty in Structural Dynamics. 1st International Conference on Uncertainty in Structural Dynamics, Sheffield, 11-13 June 2007, 179-188.

JE Herencia, PM Weaver & MI Friswell, Initial Sizing Optimisation of Anisotropic Composite Panels with T Shape Stiffeners. 66th International Conference on Mass Properties, Madrid, Spain, 28-30 May 2007, paper number 3410.

NAJ Lieven, J Coote, MI Friswell, C Hatch, GW Skingle & CH Greaves, Refinement of Dynamic Finite Element Models from the GARTEUR AG14 Collaborative Programme. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, Hawaii, 23-26 April 2007, paper AIAA-2007-2065.

F Mattioni, PM Weaver, MI Friswell & KD Potter, Modelling and Applications of Thermally Induced Multistable Composites with Piecewise Variation of Lay-up in the Planform. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, Hawaii, 23-26 April 2007, paper AIAA-2007-2262.

JE Herencia, PM Weaver & MI Friswell, Morphing Wing Design via Aeroelastic Tailoring. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, Hawaii, 23-26 April 2007, paper AIAA-2007-2217.

JE Herencia, PM Weaver & MI Friswell, Local Optimisation of Anisotropic Composite Panels with T Shape Stiffeners. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, Hawaii, 23-26 April 2007, paper AIAA-2007-2214.

RN Merce, GN Doz, JLV de Brito, JHG Macdonald & MI Friswell, Finite Element Model Updating of a Suspension Bridge using ANSYS Software. Inverse Problems, Design and Optimization Symposium, Miami, Florida, USA, 16-18 April 2007, paper 73.

MI Friswell & S Adhikari, Non-local Models of Stiffness and Damping. International Conference on Engineering Dynamics (ICED 2007), 16-18 April 2007, Praia do Carvoeiro, Algarve, Portugal.

JET Penny & MI Friswell, The Dynamics of Cracked Rotors. 25th IMAC, Orlando, Florida, USA, 19-22 February 2007, paper 198.

MI Friswell & JET Penny, Shaped Sensors for Vibration Control and Health Monitoring. 25th IMAC, Orlando, Florida, USA, 19-22 February 2007, paper 193.

S Adhikari, K Lonkar & MI Friswell, Experimental Case Studies on Uncertainty Quantification in Structural Dynamics. 25th IMAC, Orlando, Florida, USA, 19-22 February 2007, paper 174.